Tutti Frutti Base №1 13ml

Tutti Frutti Base is a camouflaging base with colorful figures for covering and leveling nails.

Features:

• Mildly acidic, with a pH of 5-6.
• Elastic and flexible.
• High coverage of natural nails due to its high pigmentation.
• May experience minimal shrinkage during wear due to its elasticity.
• Medium consistency, self-leveling.
• Ensures wearability without chipping for 3-4 weeks.
• Has a neutral smell.
• Prevents excessive heating of the nail plate during polymerization, so it doesn’t cause burning in the lamp.
• Hypoallergenic.
• Easily removed by filing or with liquid remover.
• Does not run and levels very quickly.
• Requires an underlayer of Rubber Base.
• Not suitable for leveling long nails without prior strengthening.
• Curing time in the lamp is 120 seconds.
• Can be additionally heated to make the consistency thinner.
• Lamp power for curing — 48 W (must be an original lamp).
• The main rule for leveling is that the thickness should be 1-1.5 mm at the edge.
• Thixotropic — becomes thinner when working with a brush.

Application Method:

• Removal.
• Do not file the nail shape. Alternatively, leave an extra 2 mm of length, which will be filed and removed after leveling.
• Buff the nail surface lightly with a 220-grit file to lift the scales of the nail plate or use a 100-grit buffer.
• Manicure.
• If you use removers, wash hands with soap and water after their use.
• Degrease the nail. This should be done in two steps. Use 4 wipes, one for each set of 5 nails. First step: wipe the nail surface. Second step: take an orange stick, wrap it with a wipe, and clean the cuticle and sidewalls.
• Dehydrator (optional).
• Primer can be used optionally. However, if the base coat has sufficient acidity, the primer is not necessary.
• Apply an underlayer of Rubber Base Lunamoon. It is best applied with a flat gel brush. The movements should be rubbing. It is important to cover all the sidewalls of the nail. Cure for 30 seconds.
• Remove the tacky layer.
• Leveling. Cure in the lamp for 120 seconds.
• File the shape after leveling. This is necessary to create a thickness at the edge that will support the free edge.
• After filing, remove the tacky layer.
• Apply top coat and cure for 120 seconds. Do not wipe after curing, as it may lose its shine.